Emerson 2130 RBM Consultant Pro, Справочное руководство

Страница: 96 / 394

3-16 Horizontal Alignment
Job Reset
The Job Reset key allows the operator to “Clear Job Data,” “Load Default Values,”
or “Load Default Tolerances.”
Clear Job Data
Use the Clear Job Data function to clear all stored data and notes from the active
job. Before any data is cleared, a warning message will be displayed asking the oper-
ator if this is truly the operation to be performed. If the operator answers yes, then
the data stored on the job will be cleared and the operator is taken back to the Main
screen. If the operator answers no, then the operation is aborted and you will
return to the Alt Main screen.
Load Defaults Values
Use the Load Default Values function to load job default parameters. Before any
defaults are loaded, a warning message will be displayed asking the operator if this
is truly the operation to be performed. If the operator answers yes, then the job
defaults are loaded and all job data is cleared and the operator remains at the Alt
Main screen. If the operator answers no, then the operation is aborted and the
operator remains at the Alt Main screen.
Load Default Tolerances
Use the Load Default Tolerances function to load default alignment tolerances.
Before any defaults are loaded, a warning message will be displayed asking the
operator if this is truly the operation to be performed. If the operator answers yes,
then the default alignment tolerances are loaded and the operator remains at the
Alt Main screen. If the operator answers no, then the operation is aborted and the
operator remains at the Alt Main screen.
Since the application cannot communicate with PC (for the Basic Align application
running in the 2130 analyzer) the only tolerance values available are the CSI
default values.
The Advanced Laser Align application, when configured to run in the Basic Mode,
can use User Defined tolerance values because the program can communicate
with a PC, and download tolerance tables.