Emerson 2130 RBM Consultant Pro, Справочное руководство

Страница: 302 / 394

4-16 Vertical Alignment
Although both Head A and Head B of the older version of Model 8215/8225 laser
heads have gray front panels with black grid lines, A and B are marked on the front
panel of the laser head. The newer version of Model 8215/8225 laser heads have A
and B marked on the front panel, and additionally can be identified by their dif-
ferent colored front panels. Head A has a gray front panel with white grid lines
while Head B has a blue front panel with white grid lines.
Note
The program automatically knows whether the Model 8215 or the
Model 8225 laser heads are being used.
Vertical Laser Configuration Function Keys
Change Laser Config
Use the Change Laser Config key to toggle configuration of the laser heads. The
display must be set to match the actual location for each of the laser heads based on
how the machines are to be viewed during the alignment.
Laser Address Selection
Use the Laser Address Selection key to check and set the head and analyzer
addresses. This option functions exactly as described for a horizontal alignment
job. Refer to the Laser Address Selection section on page 3-24 for more informa-
tion.
Check Lasers
Use the Check Lasers key to check the operational status of the heads. Except for
the following, this option functions similarly for a horizontal alignment job. Refer
to the Check Lasers section on page 3-24 for more information.