Emerson 2130 RBM Consultant Pro, Справочное руководство

Страница: 30 / 394

2-10 Setting Up and Using Laser Alignment Fixtures
General Maintenance
Care and Handling
To ensure satisfactory service from this system, follow these procedures:
• Keep the mounting base and chain mounting posts lightly oiled to prevent
them from corroding.
• To maintain repeatability and accuracy, avoid dropping fixture items. Refer
to the Customer Assistance section for repair, update, and calibration.
• Do not subject system items to large temperature swings.
• Do not engrave on the sensor heads.
• Keep all lens free of grease, dirt, oil, and other smudges.
• Clean the laser and target lens with a soft, lint-free cloth and standard lens
cleaning solution (a field size cleaner container is available from Emerson).
Never use an organic solvent such as a thinner or benzine.
• Store sensor heads in protective hard-shell carrying case when not in use.
Calibration
The Model 8215/8225 calibration should be checked every two years. Return the
sensor heads to Emerson for a calibration check. All calibrations are NIST trace-
able.
Caution!
Do
not
remove the CSI Quality label on the back of the sensor head. This
will
void
your warranty.