Elsner 70191, Инструкция по установке и эксплуатации

Страница: 34 / 133

33 Automatic settings
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Setting of the automatic
The automatic blind functions can be accessed by pressing the buttons:
The automatic roller shutter functions can be accessed by pressing the buttons:
Now you can select individual blinds respectively roller shutters and adjust their set-
tings. For each shade the following settings can be changed:
Press the button to set the brightness above which the blind respectively the roller
shutter will be deployed to offer shade.
Adjust value: Use the arrow buttons to change the value according to your desire. De-
fault setting: 40 kLux.

7.2. Units for sun and wind
Keep closed: If the blind respectively the roller shutter should remain closed when
there is brightness, select Always. The shading will then remain closed and will only
be retracted when the rain or wind alarms trigger, if these functions have been activat-
ed. The slat (for blinds) and movement position can be adjusted individually. Manual
opening is possible.
Leave open: If the blind respectively the roller shutter should not react to the bright-
ness, select
Never . The shading will then only be closed in the night closing and time
closing periods set by you. Manual closing is possible.
Confirm your setting with the OK button.
For the automatic system to react, the set light intensity value must be exceeded or un-
dercut for the duration of the delay times. This prevents constant up and down move-
ment of the shading during rapidly changing light conditions. The movement delays
can be adjusted.

System > Automatic Settings > General Settings > Movement delays

3.3. Adjust movement delays (shading elements)
Press the button to set the range (sun direction) in which the sun shall be, so that the
blind/roller shutter provides shade.
Automatic
settings
Blind System
Automatic
settings
Shutter System
Intensity
Direction of sun