Elsner 70191, Инструкция по установке и эксплуатации

Страница: 95 / 133

94 Basic Setting WS1000
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Follow the instructions on the display and press with a pointed object (preferably the
enclosed control stylus) on the centre of the cross. This will adjust the touch surface.
6.3.2. Service settings
In the menu area System > WS1000 Settings > Service you can adjust the follow-
ing settings:
• Reset (new start)
• Factory settings
• Internal area
In normal operation of the control unit, the service settings are
not used. Damage may arise through inappropriate use!
Reset (new start)
Reset restarts the control system’s software. In the process, the automatic settings will
be maintained. After starting up, all drives and devices will be in automatic mode.
The Reset function can be accessed by pressing the buttons:
Press Reset and the control system restarts.
Factory settings
By resetting to the factory defaults all basic and automatic settings will be deleted. The
control unit will once again be in the condition it was when delivered.
The Factory settings can be accessed by pressing the buttons:
Select Factory Defaults. Enter the code “81” via the keypad which appears and con-
firm with the OK button. The factory settings will be loaded and the control system re-
started.
WS1000
Settings
Service System
Reset
WS1000
Settings
Service System
Factory Defaults