Elsner 70191, Инструкция по установке и эксплуатации

Страница: 87 / 133

86 Basic Setting WS1000
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
RF relay
RF-MSG motor control devices
Name To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK key.

2.4. Input keyboard for names and codes
Radio status Radio status display
RF-VM status Display of Serial number and version
Settings Press the Manual Menu button to set if the vent shall
be displayed in the manual menu. Confirm your choice
using the
OK key.
Radio module type “RF-Relais“ display
Type of automatic To set what shall be connected to the RF relay, press
the button. Select the type of automatic regime (heat-
ing, cooling, alarm, light, roof gutter heating, supply air,
dimmer or none). If "Dimmer" or "None" is selected, the
device can be switched on and off only by hand, there
are no automatic regime menus. Confirm your entry
using the
OK key.
Radio module name To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK key.

2.4. Input keyboard for names and codes
Radio status Radio status display
RF relay status Display of Serial number and version
Settings Press the Manual Menu button to set if the device
shall be displayed in the manual menu. Confirm your
choice using the
OK key.
Radio module type “RF-MSG“ display
Type of automatic To set what shall be connected to the RF-MSG relay,
press the button. Select type of automatic regime (awn-
ing, window, sky roof, blinds). Confirm your entry
using the
OK key.
Radio module name To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK key.

2.4. Input keyboard for names and codes
Radio status Radio status display