Elsner 70191, Инструкция по установке и эксплуатации

Страница: 57 / 133

56 Automatic settings
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
3.1.10.Automatic light settings
For connected lights the following automatic settings can be changed:
• Time switches
• Twilight operation
• Enable/Disable automatic reset
The automatic lighting functions can be accessed by pressing the buttons:
Now you can select individual lights and adjust their settings. For each light the follow-
ing settings can be changed:
Press the button to set the time switch. Press Select to select the time during which
the lights will be turned on. As soon as you activate the twilight setting (see below), the
light will only be turned on at twilight in the selected time periods. Activate one or
more periods on the list.
Confirm your setting with the OK button.
To change any of the time periods, press Timer .

3.3. Set timer
Press the button to enable or disable the twilight/night switch. If the twilight setting is
active, the light is only turned on at twilight in the time periods selected above. Pre-
setting: No (twilight switching off).
Confirm your setting with the OK button.
The threshold value, above which twilight/night will be recognised, can be adjusted.

System > Automatic Settings > Twilight

3.3. Adjust twilight value
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on: To set the light to Automatic at a set point in time, select Yes (this is the
default setting).
Automatic
Settings
Light System
Time Switch
Twilight
Automatic Reset