Elsner 70191, Инструкция по установке и эксплуатации

Страница: 91 / 133

90 Basic Setting WS1000
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Confirm your setting by pressing OK .
6.2.6. Define channel order
This is where you define the order in which the drives and devices are shown in the
menues. Press the buttons:
Here all configured drives and devices (“channels”) are displayed. Note that the list
also includes those channels that do not appear in the manual menu. The display in the
manual menu can be activated or de-activated in the base settings for every single
channel.

6.1. Set up drives and drive groups
Press the button of the channels to be changed and shift them with the arrow keys that
appear on the right.
Confirm the new sequence with the OK button.
6.3. WS1000 Settings
In the menu area System > WS1000 Settings you can adjust the following settings:
• Change personal data such as time/date and location and adjust the screen
display to your personal preferences (Settings)
• Restart, reset to factory defaults and change internal settings of the control
(Service)
• Set an access code to protect the “Installation” and “Automatic Settings”
menus from unauthorised changes
• Storing the set-up data for the control system on the SD card or reading the
data from the SD card
6.3.1. Settings
In the menu area System > WS1000 Settings > Settings you can adjust the follow-
ing settings:
• Time and date
• Language
• Display
• Time zone
• Location
• Calibrate touch
Installation
Channel Order System