Elsner 70191, Инструкция по установке и эксплуатации

Страница: 40 / 133

39 Automatic settings
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on: To set the blind respectively the roller shutter to Automatic at a set point
in time, select
Yes (this is the default setting).
Switching off: To switch off the blind’s/shutter’s Reset function, select No .
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on: To perform an Automatic Reset after a manual intervention, select Yes .
Switching off: To switch off the blinds’s/ shutter’s Reset function, select No (this is the
default setting).
Confirm your setting with the OK button.
Automatic Reset time and/or period can be set.

System > Automatic Settings > General Settings > Automatic Reset

3.3. Define automatic reset
3.1.6. Automatic window settings
For connected windows, sliding roofs, step windows or window groups, the following
automatic settings can be changed:
• Indoor sensor to be used for the window
• Indoor temperature
• Air humidity
• Supply air temperature
• Night-time re-cooling (together with indoor temperature and movement
position for night-time re-cooling)
• Movement position (only for sliding windows)
• Number of steps (only for step windows)
• Timed ventilation
• Outdoor temperature
• Timed closure
• Frost alarm
• Wind alarm
• Rain alarm
• Gap ventilation
• Gap position
• Enable/Disable automatic reset
Alarm Functions
Alarm functions are used for windows in manual and in automatic mode.
Automatic Reset