Elsner 70191, Инструкция по установке и эксплуатации

Страница: 130 / 133

129
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
No weather data ( KNX WS1000 Color is not receiving any weather data from the
bus after start-up/reset):
• In the display unit of the KNX WS1000 Color , the message "No link to the
weather station" is displayed instead of the weather animation.
• There is no automatic control active and the wind and rain alarms are
cautiously active, i.e. drives with the appropriate settings for wind and rain
protection move to the safe position.
• The normal automatic mode of operation is restored only if all the weather data
has been received (brightness value, wind value, precipitation status and value
of outdoor temperature).
8.3.4. Functional blocks
Blocks with 7 objects
The menu point appears only if the option that blocks with 7 objects should be used
has been selected with "Functional blocks".
The data for awnings, blinds, shutters, windows and Elsner electronic ceiling fans
WL305/610 is transmitted with the help of these 22 blocks. The blocks are also suitable
for light, dimmers, buttons, 3-way combination sensors (temperature, humidity and
CO2), thermal hygrometer, temperature sensors and floating point values.
In "Functional Blocks", the option selected is:
Sending behaviour of safety objects • on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Transmit cycle
(only if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Use blocks with 7 objects No • Yes
Use blocks with 3 objects No • Yes
Use blocks with 2 objects No • Yes
Use blocks with 1 object No • Yes
Use blocks with 7 objects Yes