Elsner 70191, Инструкция по установке и эксплуатации

Страница: 127 / 133

126
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Wind speed:
If the wind sensor is connected directly to the control an transmits on the bus:
Wind direction:
Note: The function „Wind direction: transmits on bus“ is not possible with P03i-GPS
weather station, as wind direction is not detected.
If the wind direction sensor is connected directly to the control and transmits on the
bus:
If the reception of the wind direction from the bus is monitored:
Monitoring time for wind sensors 1...4 5 s • 10 s • 30 s • 1 min • … • 2 h
Wind sensor 1/2/3/4 • do nor use
• transmits on bus
• receives from bus (without monitoring)
• receives from bus (with monitoring)
Sending behaviour • transmit periodically
• transmit on change
• transmit on change and periodically
on change of
(only if transmitting on change)
0.5 m/s • 1.0 m/s • 2.0 m/s • 5.0 m/s
Transmit cycle
(only if transmitting periodically)
5 secs • 10 secs • 30 secs • 1 min • … • 2 h
Use malfunction object verwenden No • Yes
Wind direction • do nor use
[• transmits on bus]
• receives from bus (without monitoring)
• receives from bus (with monitoring)
on change of
(only if transmitting on change)
0.5 m/s • 1.0 m/s • 2.0 m/s • 5.0 m/s
Transmit cycle
(only if transmitting periodically)
5 secs • 10 secs • 30 secs • 1 min • … • 2 h
Use malfunction object verwenden No • Yes
Sending behaviour • transmit periodically
• transmit on change
• transmit on change and periodically
on change of
(only if transmitting on change)
0.5 m/s • 1.0 m/s • 2.0 m/s • 5.0 m/s
Transmit cycle
(only if transmitting periodically)
5 secs • 10 secs • 30 secs • 1 min • … • 2 h
Use malfunction object verwenden No • Yes
Monitoring time
of wind direction sensor 5 secs • 10 secs • 30 secs • 1 min • … • 2 h