84
Basic Setting WS1000
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
WGT temperature sensor:
Remote control Remo 8
Measured values
Display of current values.
To adjust the sensor, press the
Adjust
button. Adjust
the value for "Displayed temperature/humidity". A cor-
rection of measured values may be needed when the
temperature/air humidity on the sensor does not corre-
spond to the room average (e.g. when the sensor has
been installed in a place with above-average tempera-
tures) Confirm your entry using the
OK
key.
Settings
Press the
Manual Menu
button to set if the indoor sen-
sor shall be displayed in the manual menu. Confirm
your choice using the
OK
key.
Radio module type
“WGT“ display
Name
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK
key.
2.4. Input keyboard for names and codes
Radio status
Radio status display
WGT status
Display of serial number and version
Measured values
Display of current value.
To adjust the sensor, press the
Adjust
button. Adjust
the value for "Displayed temperature". Confirm your
entry using the
OK
key.
Settings
Press the
Manual Menu
button to set if the indoor sen-
sor shall be displayed in the manual menu. Confirm
your choice using the
OK
key.
Radio module type
“Remo 8“ display
Radio module name
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK
key.
2.4. Input keyboard for names and codes
Serial number
Display of serial number
Drive groups
Press the
Allocate
button to allocate drives and
devices to the manual sender channels.
Select channel for the manual sender (channels 1 to 8).
Select the drives and/or devices to be controlled by the
channel. Confirm your entry using the
OK
key.
ATTENTION!
Only drives/units with the same function should be controlled together using a
single transmitter channel (e. g. blinds or windows alone).
Содержание 70191
Страница 6: ...5 Clarification of signs...
Страница 14: ...13 Description Control System KNX WS1000 Color Status 18 04 2016 Errors excepted Subject to technical changes...
Страница 80: ...79 Commissioning Control System KNX WS1000 Color Status 18 04 2016 Errors excepted Subject to technical changes...
