Elsner 70191, Инструкция по установке и эксплуатации

Страница: 33 / 133

32 Automatic settings
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Switching off: To switch off the awning’s Reset function, select No (this is the default
setting).
Confirm your setting with the OK button.
Automatic Reset time and/or period can be set.

System > Automatic Settings > General Settings > Automatic Reset

3.3. Define automatic reset
3.1.5. Automatic blind and roller shutter settings
For connected blinds and roller shutters (or groups of blinds/roller shutters) the follow-
ing automatic settings can be changed:
• Light intensity
• Direction of sun
• Height of sun
• Movement position
• Slat position (only for blinds)
• Indoor sensor to be used for the blind/roller shutter
• Indoor temperature block
• Night closure
• Timed closure
• Outdoor temperature block
• Frost alarm
• Wind alarm
• Rain alarm
• Enable/Disable automatic reset
Alarm Functions
Alarm functions are used for shades in manual and in automatic mode.
During frost, wind or rain alarm the shades are retracted and cannot be manually
extended.
Shade settings
The settings are only executed if a shade is in automatic mode and none of the afore-
mentioned alarm functions is active.
The highest priority is given to the outdoor temperature block , followed by timed
closure (extend), night closure (extend) and indoor temperature-block (retract).
Only when the direction and height of the sun agree and there is no active block is the
automatic shading by light intensity engaged.