Elsner 70191, Инструкция по установке и эксплуатации

Страница: 129 / 133

128
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Weather data is received from the bus
In "General Settings", the option selected is:
Set the monitoring of the wind and rain objects:
If the KNX WS1000 Color does not receive any wind measured value or the precip-
itation status, a wind alarm or rain alarm is triggered to the controller. Drives with ap-
propriate automatic settings for wind or rain protection then move to the safe position.
No date / time ( KNX WS1000 Color is not receiving any time information from the
bus after start-up/reset):
• In the display unit of the KNX WS1000 Color , the message "Please set the
time" is displayed instead of the weather animation.
Transmit cycle
(only if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Temperature measurement value • do not transmit
• transmit periodically
• transmit on change
• transmit on change and periodically
On change of
(only if "on change" is selected)
0.1°C • 0.2°C • 0.5°C • 1.0°C • 2.0°C • 5.0°C
Transmit cycle
(only if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Wind measurement • do not transmit
• transmit periodically
• transmit on change
• transmit on change and periodically
On change of
(only if "on change" is selected)
0.5 m/s • 1 m/s • 2 m/s • 5 m/s
Transmit cycle
(only if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Brightness measurement value • do not transmit
• transmit periodically
• transmit on change
• transmit on change and periodically
On change of
(only if "on change" is selected)
2% • 5% • 10% • 25% • 50%
Transmit cycle
(only if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Weather data receive from bus
Use monitoring of wind and rain objects No • Yes
Monitoring period for wind object 5 s • 10 s • 30 s • 1 min • … • 2 h
Monitoring period for rain object 5 s • 10 s • 30 s • 1 min • … • 2 h