Elsner 70191, Инструкция по установке и эксплуатации

Страница: 126 / 133

125
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
8.3.1. General settings
8.3.2. Wind sensors
In this menu you can set the evaluation of additional wind sensors by the control. A
wind sensor connected directly to the control can transmit data to the bus, a wind sen-
sor in the bus system can transmit data to the control. The reception of data from the
bus can be monitored. In this case, wind alarm will be triggered if data has not been
received correctly.
Transmission delays after power-up and
programming for:
Weather data 5 s • 10 s • 30 s • 1 min • … • 2 h
Functional blocks 5 s • 10 s • 30 s • 1 min • … • 2 h
Maximum message rate 10 • 20 messages per second
Weather data • do not use
• send to bus
• receive from bus
Malfunction object do not use • use
Locking object for all outputs do not use • use
Blocking before 1st communication
(only if the locking object is used for all out-
puts)
not active • active