Elsner 70191, Инструкция по установке и эксплуатации

Страница: 52 / 133

51 Automatic settings
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Press the button to set the indoor temperature above which the circulating air heating
will be switched on during the day. Until an indoor sensor is selected, the automatic
heating is deactivated. Use the arrow buttons to change the value according to your
wish. Default setting: 16.0 °C.
Confirm your setting with the OK button.
Press the button to set the night-time operation for the circulating air heating. Press
Select to select the time during which the night mode will operate. Activate one or
more periods on the list. The periods can be individually customised (see below).
Confirm your setting with the OK button.
To change any of the time periods, press Timer .

3.3. Set timer
Press the button to set the indoor temperature above which the heating will be
switched on at night. The button is only active if a night mode operation period has
been set. Use the arrow buttons to change the value according to your wish. Default
setting: 9.0°C
Confirm your setting with the OK button.
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on: To set the ventilation unit to Automatic at a set point in time, select Yes
(this is the default setting).
Switching off: To switch off the ventilation unit’s Reset function, select
No .
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on: To perform an Automatic Reset after a manual intervention, select Yes .
Switching off: To switch off the ventilation unit’s Reset function, select No (this is the
default setting).
Confirm your setting with the OK button.
Temp. Heating
Only for fresh air/heating-combos on RF-VM.
Night mode
Only for fresh air/heating-combos on RF-VM.
Indoor Temp. Night
Automatic Reset
For all ventilation units.