Elsner 70191, Инструкция по установке и эксплуатации

Страница: 50 / 133

49 Automatic settings
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Press the button to set the times for night-time re-cooling. The button is only activated
once the general settings for night-time re-cooling have been configured.

System > Automatic Settings > General Settings > Night-time Cooling

3.3. Set night-time re-cooling (ventilation)
Press Select to select the time during which the night-time re-cooling will operate. Ac-
tivate one or more periods on the list.
Confirm your setting with the OK button.
To change any of the time periods, press Timer .

3.3. Set timer
Be careful that your settings for timed closure do not prevent night-time re-cooling op-
erations! A set supply air temperature block can also prevent night-time re-cooling.
Press the button to set the indoor temperature to the desired cooling level (for the
night-time re-cooling). The button is only activated once a night-time re-cooling period
has been set.
Use the arrow keys to change the value as required. Default setting: 16.0°C.
Confirm your setting by pressing OK.
Press the button to set the ventilation levels of the motorised roof ventilators for the
night-time re-cooling. The button is only activated once a night-time re-cooling period
has been set.
Use the arrow buttons to change the level according to your desire. Default setting:
Level 3.
Confirm your setting with the OK button.
Press the button to set the timed ventilation. Press Select to select the time during
which ventilation will occur. However supply air flaps are only opened if the set out-
door temperature is hit.
Activate one or more periods on the list. Confirm your setting by pressing OK .
Night-time Cooling
Not on fresh air/heating-combos on RF-VM.
NTC Indoor Temp.
NTC Exhaust Level
Only for exhaust air units.
Timed Ventilation
For all ventilation units.