Elsner 70191, Инструкция по установке и эксплуатации

Страница: 19 / 133

18 Operation and use
Control System KNX WS1000 Color • Status: 18.04.2016 • Errors excepted. Subject to technical changes.
2.3. Manually operate drives and devices
2.3.1. The „Manual“ menu
You can reach the menu for manual control of drives and equipment by using the but-
ton
Manual :
Here you can operate all connected drives and devices directly: Use the buttons to se-
lect the name of the drive or device you want to operate. You can change the order of
the list in the
System menu.

System > Installation > Channel Order

6.1. Define channel order
The selected device is marked in white. On the right-hand side you will receive status
information (e.g. on/off, open/closed, exhaust air level, error messages) and various
control options (up/down arrow keys or on/off buttons).
The Down and Up buttons are fitted with automatic time functions.
Drives:
The drive can be precisely positioned with brief button presses (less than 1 second,
short audio signal). For shutters and roller blinds, only a short step-movement com-
mand is triggered. If the button is pressed for longer than 1 second (higher audio sig-
nal: locking signal), the drive moves independently to the end position. A brief press in
the opposite direction stops the drive.
Use the arrow keys to scroll through the list.