3 Commissioning
3.1 Take system bus into operation
Gateway XN-312-GW-CAN 06/16 MN050003-EN
www.eaton.eu
39
3 Commissioning
Before switching on, check whether the power supply for the gateway is
connected correctly. The configuration and installation of the system bus
must also have been carried out correctly with all modules connected.
Startup takes place in several steps:
1.
Putting the system bus into operation
2.
Load and start the PLC program.
3.1 Take system bus into operation
When you replace XN300 slice modules without switching off the power
supply, the XN-312-GW-CAN gateway will carry out a software-controlled
RESET.
The system bus can be placed into operation with or without a configuration
check. Accordingly, decide whether the configuration check function on the
gateway should be enabled or not (it will be disabled by default).
If the type or number of connected modules changes and the configuration
check function is enabled, you will need to disable the configuration check
function and start the gateway with the function disabled. When you do so,
the gateway will read the modified target configuration, after which you can
re-enable the configuration check function.
As an alternative to commissioning the station using the configuration check
based on the DIP switches on the device, you can have the PLC run the con-
figuration check instead. This option is described in detail in the following
chapter
Chapter 8 “Station variants”, page 355.
DANGER
If you have already integrated devices and equipment into a sys-
tem, block off any parts of the system that are connected to the
working area in order to prevent access. This will ensure that no
one is injured if the system behaves unexpectedly, e.g., motors
start up unexpectedly.
DANGER
Switch off the power supply whenever replacing XN300 slice
modules.
The XN300 slice modules may be ruined otherwise!
Содержание XN-312-GW-CAN
