Docomo F960I, Инструкция по эксплуатации

Страница: 519 / 562

18
10
Set " 使用可能ユーザーの選択 (Selection of the users that are allowed to
access the connection)" → Enter " ユーザ ID (User ID)" → Enter " パスワード
(Password)" → Click [ 次へ (Next)].
■ Under Windows Vista
Enter "
ユーザ
ID (User ID)"
→
"
パスワード
(Password)" and click [
次へ
(Next)].
Go to Step 12.
11
Check that " 最適化を行う (Optimize)" is selected and click [ 次へ (Next)].
12
Check " 設定情報 (Settings)" and click [ 完了 (Done)].
13
Click [OK].
The PC may need to be rebooted depending on the settings. Click [ はい (Yes)] when a message that
prompts you to reboot the PC appears.
Performing communication
→ P23
･
Enter " ユーザ ID (User ID)" and " パスワード
(Password)" given by the provider, etc. Make
sure such as the case of each character.
･
This screen is not displayed if optimization has
already been performed.
･
When selecting "
パケット通信
(HIGH-SPEED
対
応端末 ) (Packet communication (HIGH-SPEED
compatible device))" in Step 2, click [ 次へ
(Next)] to display a message indicating that
individual optimization setting cannot be
made. Select [
はい
(Yes)] to optimize all dialup
settings for HIGH-SPEED. Take care when
performing 64K data communication or
communication with terminals other than
FOMA terminal.