Docomo F960I, Инструкция по эксплуатации

Страница: 457 / 562

455
Appendix/External Devices/Troubleshooting
■ Other
● Osaifu-Keitai function is unavailable.
･
When removing the battery pack or activating
Omakase Lock, IC card functions become
unavailable regardless of the IC card lock settings.
→ P43, 121
･ Have you activated IC card lock? → P249
● At the time of authenticating or registering
fingerprint, "Scan failed." appears even if your
finger is not in contact with the sensor.
The surface of the sensor may be wet or dew may
have condensed on the surface. Wipe the water off
with a soft cloth before use.
● 1Seg watching is unavailable.
･
Are you out of terrestrial digital TV broadcasting
service area or in a place where airwave is weak?
･
Is UIM installed correctly?
→
P41
･
Is channel set? → P270
● Sub-display is not seen clearly
Sub-display is displayed immediately after FOMA
terminal is folded, when the Side key etc. is pressed
or when a call is received. And because of the
characteristics of surface panel, sub-display may not
be seen clearly at places in the sun light. In this case,
check the display in the shade, or make a shadow
with your hand to check the display.
● Fingerprint authentication is unavailable with
FOMA terminal connected to a PC etc.
When connecting FOMA terminal using a USB cable
to a device which requires grounding such as a
desktop PC, make sure that the device is grounded in
advance. If the connected device is not grounded,
fingerprint authentication may be disabled. In such a
case, perform fingerprint authentication while
touching a metallic part (frame, external connector,
etc.) of the connected device or after disconnecting
FOMA terminal from the device.
● The display has afterimages.
･ If the battery pack is removed from FOMA terminal
before the terminal power is turned off,
afterimages may remain. Remove the battery pack
after turning OFF the power.
･
If FOMA terminal is left open for a while with the
same screen displayed, afterimages of that screen
may remain even after changing the screen for a
certain operation.
●
The display has some dots always lit or unlit.
FOMA terminal displays are manufactured by taking
advantage of highly advanced technology but some
dots may be always or never lit. Note that, this shows
characteristics of liquid crystal displays and not
defects in FOMA terminals.
● Difference in lighting color and/or brightness
･ Note that, the phenomena below are caused by
characteristics of LEDs used for lighting, not
defects of FOMA terminal :
- The lighting color and/or brightness varies among FOMA
terminals or by LEDs.
- The actual lighting color seems to discord from the lighting
color name for some FOMA terminals.
- Though the lighting color name described indicates the
major light source color of the LED, the lighting may
appear in a different color because the light source settings
are delicately different among functions.
･
Check that the Key lighting turns on in "Blueberry",
"Kiwi" and "Strawberry", and the light in the center
turns on in "Aqua", "Lime" and "Garnet" by Light
alert. If one or more of these colors do not turn on,
contact a sales outlet such as DoCoMo Shop.
→
P107, 112
■ Using FOMA terminal overseas
● 圏外
(out of service area) is displayed, and
International roaming service is unavailable.
･ You are out of the international roaming service
area or in an area with poor signal strength.
･
Check whether the service area and
telecommunications carrier are available, referring
to international service guides such as "Mobile
Phone User's Guide [International Services]".
･
Using Network search mode, search for a
telecommunications carrier available for the
service.
→
P411
･
Switch 3G/GSM setting to "AUTO" or any available
network after moving from Japan to overseas. If
"AUTO" is set in Japan, once turn OFF FOMA
terminal and then turn it ON.
→ P412
●
No incoming voice or videophone calls are received.
Is Bar calls at roaming activate? → P414
● Videophone call, i-mode or SMS is unavailable.
･
Check whether the service area and
telecommunications carrier are available, referring
to international service guides such as "Mobile
Phone User's Guide [International Services]".
･ Check the settings of 3G/GSM setting. → P412
●
No caller ID is notified/A notified caller ID is
different from that of the caller/Functions for using
contents saved in phonebook or those using Caller
ID notification do not operate.
Even when a caller notifies its caller ID, it is not
displayed on FOMA terminal unless notified from the
network or telecommunications carrier used. And, a
notified caller ID is different from that of the caller by
some networks or telecommunications carriers used.