Docomo F960I, Инструкция по эксплуатации

Страница: 556 / 562

55
Result codes
I
When ATV command is set to n=1 (default), the result code is displayed in alphabetic characters. When
the command is set to n=0, the result code is displayed numerically.
→ P48
■ Result codes
■
Extended result code
･
When AT&E is set to n=0
･
When AT&E is set to n=1
* To retain compatibility with a modem connected via conventional RS-232C, communication speed is displayed, but
it differs from the actual connection speed because FOMA terminal is connected to a PC with a USB cable.
■ Communication protocol result code
No. Text display Meaning
0 OK Operation performed normally
1 CONNECT Terminal connected to other party
2 RING Incoming call
3 NO CARRIER Line disconnected
4 ERROR Unable to accept command
6 NO DIALTONE Unable to detect dial tone
7 BUSY Detecting the busy tone
8 NO ANSWER Completed connection Time-out
100 RESTRICTION Network restriction in place (The communication network is busy.
Please wait for a while and retry.)
101 DELAYED Redial call restricted
No. Text display Connection speed between FOMA terminal and base station
122 CONNECT 64000 64000bps
125 CONNECT 384000 384000bps
133 CONNECT 3648000 3648000bps
No. Text display Connection speed between FOMA terminal and a PC
5 CONNECT 1200 1200bps
10 CONNECT 2400 2400bps
11 CONNECT 4800 4800bps
13 CONNECT 7200 7200bps
12 CONNECT 9600 9600bps
15 CONNECT 14400 14400bps
16 CONNECT 19200 19200bps
17 CONNECT 38400 38400bps
18 CONNECT 57600 57600bps
19 CONNECT 115200 115200bps
20 CONNECT 230400 230400bps
21 CONNECT 460800 460800bps
No. Text display Meaning
1 PPPoverUD Connect via 64K data communication (BC=UDI, +CBST=116,1,0)
3 AV64K Connect via 64K videophone
5 PACKET Connect via packet communication