Docomo F960I, Инструкция по эксплуатации

Страница: 369 / 562

367
Convenient Functions
Fake call
Pretending to be receiving a call and talking
Fake call is a function to initiate a call receiving operation and answering to the
guidance played after receiving the call to pretend to be busy.
･
Since voice line is not used, it can be used regardless of the radio wave
conditions. And, the call cost is not charged.
◆ Setting Fake call
1
m
[Accessory]
72 e
Set the required items
e C
･
When setting Call start time to other than "Ring now", a countdown screen
appears when you start a fake call. The incoming operation is performed
when the specified time elapses.
◆
Starting Fake call
1
m
[Accessory]
71
Ring alert sounds according to Alert&Time settings, and the fake call
incoming screen appears. And, it operates according to the settings of Call in
Light alert (for "OFF", operates in "Flash").
･
If pressing side key [ ▲ ] while receiving Fake call, it operates in silence.
2 n
The guidance of fake call is heard from the ear piece, and the fake call talking
screen appears. And, even if Call session light is "OFF", the light blinks
according to the lighting color of Call session light.
･
Press
f
to end.
✔
INFORMATION
･
When setting the ring start time of Alert&Time settings to "Ring now" with Side key
shortcut set to "Fake call", if you make an fake call by pressing side keys [
▲▼
] for 1
second or more, countdown starts after the vibrator operate for approximately 0.5
seconds.
･
In Silent mode, the ring alert does not sound and the vibrator operates in "Pattern A".
If pressing side key [
▲ ], the vibrator stops.
･
The ring alert is heard from the speaker even in Public mode (Drive mode) or when
Flat-plug Earphone/Microphone with Switch (optional) is connected.
･
You can receive Fake call by pressing
0
-
9
,
*
,
#
.
･
You can receive a fake call by rotating the display from horizontal to vertical.
･
Fake call can be terminated by folding FOMA terminal.
･
If there is any of operations below during a fake call, ring tone or alarm sound is not
sounded, and vibrator operates in "Pattern A".
- When there is an incoming call or PushTalk call
- When mail or MessageR/F is received
- When the date and time specified in countdown timer, alarm clock or schedule comes
- When specified time for 1Seg watching reservation comes (except when Alarm setting is "No")
･
When switching to another function during Fake call, a confirmation screen for
resuming/starting unavailable Fake call appears after the function finishes.
Voice memo/Movie memo
Recording voice/image
You can record voice or images while talking over a call or in stand-by mode.
･
Up to 4 voice memo while talking or voice memo in stand-by can be recorded in
total, with up to 30 seconds for each memo.
･
Movie memos up to 30 seconds each can be recorded.
･
Some messages such as out of service area notice or number change
information may not be recorded.
･
The recording of the voice memo while talking or movie memo may be distorted
or the image may be blurred if the radio waves are poor.
･
Playing of voice memo → P68
･
Playing of movie memo (saved in "Camera" folder of i-motion.)
→
P299