Docomo F960I, Инструкция по эксплуатации

Страница: 274 / 562

272
1Seg
Activate 1Seg
Watching 1Seg
1 T
A confirmation screen for using 1Seg appears.
･
For the second and subsequent activation, the channel previously watched
is displayed.
･
When activating for the second time or after, if Channel list is not set, a
screen to perform channel setting appears. Press "OK" and create Channel
list
→ P270 Step 2 and the following steps in "Creating Channel list"
2
Check usage conditions
e
"OK"
A screen for confirming the storage area appears.
3
Check displayed contents
e
"OK"
1Seg watching starts.
･
If the channel list is not set, a screen for urging you to set the channel list
appears. Press "OK" and create Channel list
→ P270 Step 2 and the following
steps in "Creating Channel list"
✔
INFORMATION
･
You can also activate 1Seg watching in the ways below.
- Select a channel from TV station list screen of Channel list
- Select 1Seg watching information etc. displayed on Program guide i-
α
ppli, mail, MessageR/F, i-
Channel, site, Web site, etc. (Media To) → P169
- Watching reservation
→
P275
･
When using 1Seg watching for the first time, operate within FOMA service area.
･
A confirmation screen for 1Seg usage or storage area once appeared or a
confirmation screen for which "Yes (Always)" is selected during 1Seg operation does
not appear subsequently unless UIM is replaced or Reset permit status is done.
･
If you select "Yes (Always)" on a confirmation screen, subsequent updating of data
broadcasting or data broadcasting site information, etc. may be performed without
confirmation, requiring packet communication fees.
◆
Reading and operating screen
a
FM transmission state
: During FM transmission
→
P283
b
Video
Data broadcasting full-screen 1Seg watching screen (Standard screen)
i
b
c
d
ef
gh
a
jklm
nopq
1Seg watching screen (Horizontal standard screen)
d
efghi
jklmnopq
b
jknfem
i
c
b
1Seg watching screen (Horizontal full-screen)