Docomo F960I, Инструкция по эксплуатации

Страница: 262 / 562

260
GPS Function
･
When " 毎回確認 (Check each time)" is set for usage settings by services, a screen
shown below appears. Select "Yes" to start Location request.
✔
INFORMATION
･
Sending Location information requires no charge.
･
Location request is unavailable while positioning with Position location or Notify
location, while FOMA terminal is out of service area or during Self mode, i-mode
communication with i-
α
ppli or infrared communication/iC transmission. If the battery
is exhausted or Omakase Lock is activated while positioning, it is stopped.
･
Information is not delivered by Location request to the requestor under some wave
conditions.
･
If " 毎回確認 (Check each time)" is set for usage settings by services when Location
request is issued during Public mode (Drive mode), location information is not sent.
If " 許可 (Permit)" is set, a screen appears and location information is sent, but the GPS
alert sound is not emitted, and the light or vibrator does not operate.
･
With 2in1 ON, Location request for Number A is available regardless of mode of 2in1.
･
When you are required to provide the location information by a party using
imadocokantan search, it operates as below.
- Every time you are required, a confirmation screen for location information appears. If you select
"Yes", a rough positioning result is immediately notified to the other party. After the positioning,
high-precision positioning results are notified to the other party.
- Even if the location request is interrupted after selecting "Yes" on the confirmation screen of
location request, a rough positioning result is notified to the other party. In this case, although it is
recorded in the Loc. history, the location information is not displayed.
◆
Setting whether to permit/deny Location request
<Request permit/deny>
You can set if you provide location information when there is a request from other
parties.
･
"Always permit" or "Always deny" in this setting can also be set in initial
settings.
→
P48
1 m
[LifeKit]
761 e
Authenticate
e 1
-
3
･
With "Always permit" set, location information may be sent and notified to
the searcher without operations.
･
(blue) appears on the stand-by display when "Always permit" or
"Permission period" is set. When permission period is outside a valid
period,
(gray) appears. With FOMA terminal folded, or appears on
the sub-display.
Setting permission period :
3 e
Set the required items
e C
Start : Set time for "Always permit".
End : Set time for "Always deny".
･
You can set the next day exceeding 24:00.
Repeat : Set repetition of operation of the set time.
･
When "Day of week" is selected, select "Day/Week", select the day of the
week to perform Location request and press
C
.
Date : Set a period of time to perform Location request. When "Specify start
date" or "Specify start/end" is set, the items below can be set.
Start : Set day for "Always permit".
End : Set day for "Always deny".