Docomo F960I, Инструкция по эксплуатации, Страница: 118 / 562

116
Security Settings
Security code
Security code available with FOMA terminal
Some of the convenient FOMA terminal functions require entry of security code.
In addition to the terminal security code for using some terminal functions, there
are several types of security codes such as network security code for network
services and i-mode password. Use these codes appropriately for FOMA terminal.
･
The terminal security code, network security code or i-mode password entered
is masked with " ".
Precautions related to security codes
･
When setting a security code, do not use a number that can be easily known
to others, such as "birthday", "a part of a phone number", "street address or
room number", "1111" or "1234". Keep a separate note of the set security
code.
･
Be careful never to reveal your security code to others. If a security code is
known to and misused by others, DoCoMo assumes no responsibility for
damages resulted from it.
･
DoCoMo never asks you about your security code.
･
If you forgot your security codes, or fingerprint authentication for all of the
fingers registered is unavailable when Fingerprint access is "ON", you need
to bring a document (such as a driver's license) for identifying that you are
a subscriber, FOMA terminal and UIM to a DoCoMo Shop.
For details, contact the phone number for "General Inquiries" on the back
of this manual.
❖
Terminal security code
The default security code is "0000", which you can change by yourself. → P117
･
If a wrong terminal security code is entered 5 times consecutively, the power is
turned OFF.
･
For the setting using Verify fingerprint, the fingerprint authentication screen
appears instead of the terminal security code entry screen. Press
m
to switch
the terminal security code entry screen. The terminal security code cannot be
entered when Fingerprint access is "ON".
❖
Network security code
Network security code is a 4-digit number used when making various applications
for DoCoMo e-site and using various network services; you can set any number at
subscription and optionally change it later.
If you have "DoCoMo ID/Password" for "My DoCoMo" that is a total support site for
a PC, you can change your network security code from a PC.
From i-mode, you can change the code by yourself accessing " 各種手続き
(Procedures)" in DoCoMo e-site.
･
For "My DoCoMo" and " ドコモ e サイト (DoCoMo e-site)", see the back of this
manual.
❖
i-mode password
4-digit "i-mode password" is required to register/delete sites in My Menu or
subscribe/unsubscribe to Message Service or i-mode pay sites. The default
security code is "0000", which you can change by yourself.
→ P162
There may be passwords required by individual IPs (Information Providers).
❖
PIN code/PIN2 code
2 security codes which are the PIN code and PIN2 code can be set for UIM. Their
security codes are set to "0000" by default, which you can change by yourself.
→
P117
PIN code is a number (code) to be entered each time UIM is installed or FOMA
terminal is powered ON to confirm the user and to prevent unauthorized use of
FOMA terminal. Making/Receiving calls and terminal operations are enabled by
entering PIN code.
The PIN2 code is the security code to be used when requesting the issuance of a
user certificate, resetting Total calls cost or changing settings of Reset call cost.
･
When installing UIM that has been used with another FOMA terminal, the PIN
code and PIN2 code should be the same ones set previously. If no changes have
been made to PIN code and PIN2 code, your codes are "0000".