Docomo F960I, Инструкция по эксплуатации

Страница: 100 / 562

98
Sound/Screen/Light Settings
Melody Call
Changing the ring tone of the phone
This is a service to change the sound like "prr" that you hear when making a call
to a mobile phone to a melody.
･
A communication fee is not required for connecting to the setting site. Note that
you are charged packet communication fees for connecting to IP site, i-mode
menu site or Free Melody Corner.
1 m
[Settings & NW services]
118 e
"YES"
The melody call site is connected.
･
For details, refer to "Mobile Phone User's Guide [Network Services]".
✔
INFORMATION
･
Melody Call is valid only when a voice call is received.
GPS alert
Setting sound for GPS positioning
･
This setting is also reflected to Position settings, Notification setting and
Positioning alert for Request setting.
1
m
[Settings & NW services]
113 e 1
-
4 e
Select the Ring alert field
e 1
or
2
･
When "Melody" is selected, select ring alert.
2 C
Keypad sound
Setting Keypad sound
You can change the sound to be emitted when pressing keys (except side keys
[
▲▼ ],
M
or
P
) or when operating pointing device. Emission of the sound can also
be inhibited.
･
When the sound of Battery level and End alert of Data exchange settings are set
to "ON", sounds are emitted according to these settings.
･
If setting to "OFF", the sound is not emitted when reading a code.
1 m
[Settings & NW services]
1151 e 1
-
5
✔
INFORMATION
･
Keypad sound is not emitted in the cases below even if it is set to ON.
- When i-
α
ppli is activated (except
s
)
- When Full Browser is activated, or when the pointer is moved by sliding the pointing device
･
If setting keypad sound to "Sol-fa", "Key sound 2" is emitted by sliding the pointing
device and the dedicated sound is emitted by double-tapping.
Open/Close sound
Setting Open/Close sound
You can change the sound to be emitted when opening/closing FOMA terminal.
1 m
[Settings & NW services]
1152 e 1
-
4
Display turn sound
Setting sound to be emitted when turning
display
1 m
[Settings & NW services]
1153 e
Select the
Turn sound field
e 1
or
2
･
When "Melody" is selected, select turn sound.
2
C
Shutter sound/Movie camera sound
Setting shutter sound
You can set a shutter sound to be emitted when shooting an image with Still
camera or recording a movie with Movie camera (including recording sound with
Sound recorder).
･
This setting is also reflected to Shutter sound of Image settings and Recording
settings.
1 m
[Settings & NW services]
115 e 4
or
5 e 1
-
5