Docomo F960I, Инструкция по эксплуатации

Страница: 192 / 562

190
Mail
c
Number of received i-mode mails
･
If you do not press any key for about 15 seconds after the reception result
screen appears, the previous screen automatically reappears.
When reception has failed
"
×
" appears on the right side of "Mail" on the reception result screen. To
receive again, perform i-mode inquiry.
✔
INFORMATION
･
When multiple mail and/or MessageR/F are received at the same time, the terminal
operates depending on the conditions set for the mail or MessageR/F received last.
･
An i-mode mail of up to 100 Kbytes including attachment files can be automatically
received. Attachment files exceeding 100 Kbytes can be manually downloaded from
i-mode Center.
→ P193
･
Extremely large i-mode mail may be returned with an error message to the sender
without being accepted in the i-mode Center.
･
When the memory space is not enough or when exceeding the savable number, the
unread or unprotected received mails are overwritten chronologically. A large
number of existing mails may be deleted depending on the size of the received mail.
･
In the cases below, received i-mode mail is stored in the i-mode Center.
- When the power is OFF
- During a videophone call
- Accessing Data Center
- During a PushTalk session
- In Self mode
- In Omakase Lock
- During FirstPass center connection
- When reception has failed
- Out of i-mode service area
- When receiving SMS
- When Receive option setting is "ON"
- During infrared communication/iC transmission
- When storage area is filled with mail unread or protected
･
If there is not enough memory space available because memory is filled with unread
and protected mails, reception of i-mode mail is stopped,
and appear on the
screen. To receive, changing unread mail to read mail ( → P201), displaying the
contents of unread mails ( → P195), deleting unnecessary mails ( → P201) or
unprotecting (
→
P201) is required.
･
If there are remaining i-mode mail in the i-mode Center, or appears. It may not
appear even when there is i-mode mail. When exceeding the savable number in the
i-mode Center, the icon changes to
or .
･
You may not automatically receive i-mode mail soon after sent. Perform i-mode
inquiry.
◆ Displaying newly-received i-mode mail
1
On the reception result screen,
1
･
MessageR/F can be displayed by pressing
2
or
3
.
2
Select a folder
e
Select a mail
Playing Flash graphics with a melody or sound effect → P209
Reading received mail details screen
→
P197
◆ Operating WEBmail
To send mails from/receive mails to address B with 2in1 ON, you need to connect
to WEBmail site. Only when 2in1 ON in B or Dual mode, you can connect to the
WEBmail site.
･
2in1 is a charged service requiring subscription.
1 a7 e
Select i-mode password entry field
e
Enter i-mode
password
e
" 決定 (Yes)"
You are connected to WEBmail site.
･
For operations in WEBmail site, refer to "Mobile Phone User's Guide
[2in1]".
Receive option
Receiving i-mode mail to select
You can check the subject of i-mode mail stored in the i-mode Center to select if
you receive or delete i-mode mail without receiving it.
･
To use Receive option, Receive option setting must be set to "ON" in advance.