Docomo F960I, Инструкция по эксплуатации

Страница: 229 / 562

227
i-
α
ppli
◆
Displaying i-
α
ppli description <Software description>
1
I
(1 sec. or more)
e
Select a folder
e
Place the cursor on the i-
α
ppli and
C
･
Displayed items differ by i-
α
ppli.
･
To check the site certificate of the i-
α
ppli downloaded from SSL page, press
C
on the Software description screen.
◆
Setting operating condition of i-
α
ppli <Software
settings>
･
You cannot select the item not supported by the i-
α
ppli.
･
When 2in1 is ON in Dual mode or B mode, "Set i-
α
ppli display" and "Set NW
transmission during i-
α
ppli display" cannot be selected.
1 I
(1 sec. or more)
e
Select a folder
e
Place the cursor on the i-
α
ppli and
m6 e
Set the required items
e C
Set i-
α
ppli display : Set if you set i-
α
ppli as stand-by display. Only one i-
α
ppli
can be set.
Set NW transmission during i-
α
ppli display : Set if you allow automatic
communication while the i-
α
ppli stand-by display is running.
Set NW transmission : Set if you allow automatic communication while the i-
α
ppli is running.
Use icons : Set if you enable icons for mail, MessageR/F, battery, Silent mode
and signal level for i-
α
ppli.
Start from browser : Set if you allow starting the i-
α
ppli from site (i-
α
ppli To).
Start from ToruCa : Set if you allow starting the i-
α
ppli from ToruCa (i-
α
ppli
To).
Start from mailer : Set if you allow starting the i-
α
ppli from mail (i-
α
ppli To).
Start from Location Service menu : Set if you allow starting the i-
α
ppli from
link item of location information in site, MessageR/F or ToruCa (i-
α
ppli To).
Start from external : Set if you allow starting the i-
α
ppli from external device
(i-
α
ppli To).
Start from data broadcasting site : Set if you permit activation from 1Seg data
broadcasting site.
Allow ring tone/image changes by software
*
: Set if you allow i-
α
ppli to
automatically change the settings of a ring alert, stand-by display image,
etc.
Confirm all changes
*
: Set if you display a confirmation screen each time the
settings of ring alert or images are changed.
Allow access to phone book/call records by software
*
: Set if you allow i-
α
ppli to refer to phonebook, redial or received call logs automatically. This
setting applies to ToruCa saved in FOMA terminal.
Location usage setting
*
: Set if you enable GPS compatible i-
α
ppli to use
location information automatically.
Program guide key setting
*
: Set if you set i-
α
ppli in program guide i-
α
ppli
activated from 1Seg. Only one i-
α
ppli can be set.
* Available only for i-
α
ppliDX.
✔
INFORMATION
･
When setting Set i-
α
ppli display to "Yes", setting confirmation screen appears (except
when the i-
α
ppli is already set to the stand-by display). If you select "Yes", stand-by
screen is set and if Show ticker of i-Channel ticker is "Yes", the ticker is canceled.
･
If you set "No" for Set NW transmission, the i-
α
ppli may not be started and timely
information such as stock prices or weather information may not be provided by i-
α
ppli.
･
If you set "Yes" for Use icons, since icons for unread messages, unread MessageR/F,
remaining battery level, Silent mode, and antenna icon may be sent to IPs
(Information Providers) through the Internet, it may give the information to a third
party. Some i-
α
ppli requiring icons may not operate when "No" is set.
･
When "No" is selected in Program guide key setting, cancellation confirmation screen
appears.
◆ Setting operations while i-
α
ppli is active
❖
Setting Display light
1 m
[i-
α
ppli]
24 e 1
or
2
･
When setting to "Terminal settings", it depends on Display light time
(Normal use) of settings of Display & Key light.
✔
INFORMATION
･
i-
α
ppli stand-by display light depends on the setting of Display & Key light.
･
Even if "Software" is set, the light turns off in Public mode when the time specified in
Display light time (Normal use) of Display & Key light has elapsed.
･
This setting is also reflected to Display light time (i-
α
ppli) of Display & Key light.