Docomo F960I, Инструкция по эксплуатации

Страница: 56 / 562

54
Voice/Videophone Calls
◆
Adjusting Listen volume during a call <Listen volume>
･
The Listen volume adjusted during a call is reflected to "Listen volume" of Adjust
volume.
1
During a voice call,
j
or side keys [ ▲▼ ]
◆
Using Voice clear/Voice slowing
❖
Switching Voice clear
Measure the noise level during a voice call, and if the noise increases above the
specified level, the other party's voice is automatically emphasized to be heard
clearly. And, the volume is automatically increased also when your or other party's
voice is low.
･
Set to "Voice clear ON" by default.
･
This function does not operate while using speakerphone function or in
overseas GSM/GPRS network.
･
The settings are retained after a call.
･
This function is not for adjusting Listen volume. Change the volume of the other
party's voice with Listen volume.
1
During a voice call,
m7
If you set Voice clear to ON, appears. When this does not
operate with ON, it is displayed in gray.
❖
Switching Voice slowing
During a voice call, adjust the other party's voice to be heard slowly by using the
silence at intervals, to make it easier to be heard. When the other party speaks
without intervals, the voice is heard at the normal speed.
･
Set to "Voice slowing OFF" by default.
･
If you set Voice slowing to ON, the quality of the other party's voice, music or
time tone may change. In such a case, set Voice slowing to OFF.
･
This function does not operate in overseas GSM/GPRS network.
･
The settings are canceled after a call.
1
During a call,
a
If you set Voice slowing to ON, appears. When this does not
operate with ON, it is displayed in gray.
Switching voice/videophone call
･
Switchable only from the caller.
･
This function is available among the models which support switching voice call
and videophone call.
･
The voice calls and videophone calls are charged individually depending on the
respective time.
･
To switch the call, Notify switchable mode needs to be started by the other
party.
→ P71
<Example> Switching to videophone call during a voice call
1
During a voice call,
I e
"Yes"
･
During call switching, a message indicating to switch the call is played.
･
When switched to videophone call, the speakerphone function is activated.
Switching to voice call during a videophone call : During a videophone call,
m1 e
"Yes"
･
The speakerphone function is canceled when the call is switched to voice
call.