Docomo F960I, Инструкция по эксплуатации

Страница: 370 / 562

368
Convenient Functions
◆
Recording voice/image of the other party while talking
1
During a call, side key [
▲
] (1 sec. or more)
Recording starts. When the remaining time becomes about 5 seconds, 2 short
beeps noticing the end of recording sound. A long beep sounds at the end of
recording.
･
During movie memo recording, the image is sent to the other party
according to the settings of Movie memo image in Image setting
(videophone image).
･
During movie memo recording, pressing
g
switches display between
lapse of the recording time and call duration.
･
To stop in the middle of recording, press side key [
▲
] for 1 second or more.
◆ Recording your own voice during stand-by
･
Operate FOMA terminal in open state.
1
Side key [ ▲ ] (1 sec. or more)
e 3
After about 3 seconds, a long beep sounds and recording starts. When the
remaining time becomes about 5 seconds, 2 short beeps noticing the end of
recording sound. A long beep sounds at the end of recording.
･
While recording, elapsed recording time appears in the bottom of the
screen.
･
Press any of
g
,
c
or
f
to stop in the middle of recording.
Call duration/Call cost
Checking call duration and call cost
Last and total call durations and costs for voice and videophone calls can be
checked.
･
The call durations are displayed individually for voice calls, videophone calls
and 64K data communication, counting both outgoing and incoming calls.
･
Call costs are only counted for outgoing calls. However "0 YEN" or " YEN"
appears when a call is made to toll free numbers such as Free-dial or to
Directory assistance (104).
･
Because the call costs are stored on UIM, the stored total calls cost appears
(totaling from December, 2004) when UIM is replaced.
*
For FOMA terminals before 901i series, the call costs are stored on UIM, but they cannot
be displayed.
･
The call durations and costs displayed are approximate values and may be
different from the actual durations and costs.
･
The call costs displayed do not include consumption tax.
◆ Checking call duration
1 m
[Settings & NW services]
761
･
If the total duration of calls was reset in the past, the total duration from that
point appears.
Last call : Duration of last incoming/outgoing voice call, videophone or data
session
Total voice calls : The total duration of voice calls made
Total videophone calls : The total duration of videophone calls made
Total data sessions : The total duration of data communication established
Reset:day&time(Voice) : Last date and time the total duration of voice calls
was reset
Reset:day&time(VP) : Last date and time the total duration of videophone
calls was reset
Reset:day&time(Data) : Last date and time the total duration of data
communications was reset
Resetting total calls : On the call duration check screen,
C e
Authenticate
e 1
-
4 e
"Yes"
Voice memo during voice call Movie memo during videophone call
Lapse of the
recording time