Docomo F960I, Инструкция по эксплуатации

Страница: 267 / 562

265
GPS Function
Setting GPS
◆
Setting positioning mode
･
In "Standard mode", positioning is performed in a short period of time.
･
"Quality mode" takes time for positioning. As a result, it may provide higher
accuracy than "Standard mode".
<Example> Setting positioning mode for Position location
1 m
[LifeKit]
742
Setting positioning mode for Notify location :
m
[LifeKit]
7522
Setting positioning mode for Location request :
m
[LifeKit]
762
2
1
or
2
◆ Setting actions in positioning <Positioning alert>
<Example> Setting actions for Position location
1 m
[LifeKit]
743
Setting operation for Notify location :
m
[LifeKit]
7523
Setting operation for Loc. request-accept :
m
[LifeKit]
7651
Setting operation for Loc. request-verify :
m
[LifeKit]
7652
2
Set the required items
e C
Ring alert : Set if you sound melody.
･
When "Melody" is set, select a melody.
Vibrate alert : Set a vibrator operation pattern.
Ring time (sec) : Set time in range of 0-30 seconds.
･
Set time in range of 0-20 seconds for Loc. request-verify.
Light alert : Set a lighting or blinking pattern and color of the light.
･
"Sync melody" cannot be selected. "OFF" cannot be selected for the case
of Loc. request-accept or Loc. request-verify.
･
When setting "Light pattern 1" or "Light pattern 2", light color cannot be
selected.
✔
INFORMATION
･
When positioning is made again or retried with Position location due to wave
conditions etc. only lighting/blinking of the light occurs.