Docomo F960I, Инструкция по эксплуатации, Страница: 222 / 562

220
Mail
✔
INFORMATION
･
When multiple mail and/or MessageR/F are received at the same time, the terminal
operates depending on the conditions set for the mail or MessageR/F received last.
･
When the memory space is not enough or when exceeding the savable number, the
unread or unprotected received mails are overwritten chronologically.
･
While receiving i-mode mail, MessageR/F or Area Mail, automatic reception of SMS
is unavailable. Perform Check new SMS.
･
When SMS is received from parties of overseas service providers except DoCoMo, "+"
is prefixed to the mail address of the sender. When the phone number with prefix "+"
is saved in phonebook, the name saved in the phonebook entry is displayed.
･
When Message scan of Set scan is "Valid", if you receive and try to display SMS with
a phone number or URL, a warning message screen appears.
･
If there is not enough memory space available because it is filled with unread and
protected mails, reception of SMS is stopped and
or appears on the screen. To
receive, changing unread mail to read mail (
→
P201), displaying the contents of
unread mails ( → P195), deleting unnecessary mails ( → P201) or unprotecting ( → P201)
is required.
･
When UIM already contains the maximum number of SMS (20 items), SMS may not
be received even if there is space available in Inbox folder. At this time,
or
appears on the screen. Move to FOMA terminal (
→
P222) or delete SMS in UIM.
→
P222
･
If received SMS specified to save to UIM, it is saved directly to UIM. Note that, when
the number of SMS saved in UIM has reached 20 items, SMS cannot be received.
Delete unnecessary SMS and perform Check new SMS.
Check new SMS
Checking for SMS
You can make inquiry for any SMS delivered while you were out of service area,
the power was turned OFF or other cases.
･
Depending on the radio wave conditions, you may not be able to perform Check
new SMS from SMS Center.
1 a915
✔
INFORMATION
･
Receiving SMS may take time.
SMS settings
Setting SMS
You usually do not need to change SMSC, Address and Type of Number
settings.
1
a914 e
Set the required items
e C
Font type : Select the font type of the message to send. The maximum
number of characters that can be sent differs by the font type.
SMS report request : Select if you request SMS report request when sending
SMS.
Keep in SMS center : Select the storage period of sent SMS in the Short
Message Center in cases the receiver cannot receive the SMS.
･
When "0 day" is set, SMS is deleted from the SMS Center after resending
of it is repeated for a certain period of time.
SMSC : Select SMSC when using SMS services except DoCoMo.
･
When setting to "Others", enter a mail address of up to 20 one-byte
characters in the Address field.
Type of Number : Select from "International" or "Unknown".
･
If selecting "Others" in SMSC field and setting numbers for Address field,
Type of Number needs to be set to "Unknown".
✔
INFORMATION
･
Operations from SMS creation screen :
m3
In that case, only SMS report request and Keep in SMS center can be set. The settings
are effective only for SMS being created.
･
Settings of Font type, Keep in SMS center, SMSC and Type of Number are saved in
UIM.