Docomo F960I, Инструкция по эксплуатации

Страница: 123 / 562

121
Security Settings
･
To start both IC card lock and All lock, start IC card lock → All lock in sequence.
→ P249
･
The microSD card and UIM remain unlocked.
1
m
[Settings & NW services]
412 e
Authenticate
"All locked." appears on the stand-by display.
Canceling : Enter the terminal security code
･
If fingerprint authentication is set, press
m
and perform authentication.
✔
INFORMATION
･
PushTalk calls received in All lock are rejected and the callers hear the busy tone. It
appears in Received calls when All lock is canceled.
･
A call is received regardless of the settings of Specified caller.
･
Even if a stand-by display is set, the image set by default is displayed.
･
All lock takes precedence over it even if Lock on close is "ON".
･
The alarm clock and schedule reminder do not operate even when the specified date
and time arrive. Activation by watching reservation or recording reservation of 1Seg
does not occur.
･
Even when the specified date/time comes, Timed theme is not switched. When
canceling All lock, Timed theme not in operation start in order.
･
The functions below are available.
- Receiving voice/videophone calls
*1
, making emergency call (110, 119, 118)
- Automatic update of Data Center
- Receiving i-mode mail, MessageR/F, SMS
*2
- Receiving Area Mail
- Starting Omakase Lock
- Obtaining ToruCa from IC card reader
- Operations for location request of GPS
*3
- Software update
- Auto-update of pattern definitions
*1 Only a phone number is displayed, but the other party's name or image saved in phonebook does
not. The incoming image, ring alert and other settings are reset to default settings, and the
default image is displayed as videophone substitute image. Chaku-moji can be received, but it
is not displayed on the incoming call screen. It is displayed in Received calls when All lock is
canceled.
*2 No receiving actions such as displaying the receiving or reception result screen, emitting ring
alert are taken.
*3 Even when the requestor ID of Location request matches a phonebook entry, the requestor name
is not displayed.
Omakase Lock
Using Omakase Lock
This is a service to lock FOMA terminal that the subscribed UIM is installed by
making a call to DoCoMo or by remote control from My DoCoMo in case FOMA
terminal is misplaced.
FOMA terminal can be unlocked upon your request, etc.
* Omakase Lock is a charged service. However, if you subscribe at the same time as service
interruption or during interruption, no charges occur. Even in Omakase Lock, if Request
permit/deny is "Always permit", FOMA terminal responds to location request of GPS
function.
Setting/Canceling Omakase Lock
0120-524-360 Office hours : 24hours
*
Omakase Lock can be set/canceled from My DoCoMo site using a PC etc.
･
For details of Omakase Lock, refer to "Mobile Phone User's Guide [i-mode]
FOMA version".
❖
When Omakase Lock is activated
"Omakase Lock active." appears on the stand-by display.
･
Operations except turning power ON/OFF, receiving voice/videophone calls, or
reactions to Location request are unavailable and the IC card functions are also
unavailable. Note, however that the microSD card and UIM remain unlocked.
✔
INFORMATION
･
Voice calls or videophone calls are received, displaying the callers phone number
instead of the name or image saved in the phonebook. The incoming image, ring alert
and other settings are reset to default settings, and the default image is displayed as
videophone substitute image. The setting you made is restored when Omakase lock
is canceled.
･
PushTalk calls received are rejected and the callers hear the busy tone, but the calls
are recorded as missed calls.
･
Chaku-moji can be received, but it does not appear on the incoming call screen. The
Chaku-moji appears in Received calls after Omakase Lock is canceled.
･
Even when the requestor ID of Location request of GPS matches a phonebook entry,
the requestor name is not displayed.