Docomo F960I, Инструкция по эксплуатации

Страница: 133 / 562

131
Security Settings
◆
Indicating activation of Lock on close with a light
<Security indicator>
You can set if you indicate state of Lock on close with a light.
1 m
[Settings & NW services]
43 e
Authenticate
e 1
or
2
❖
When Security indicator is set
If FOMA terminal is closed and Lock on close is activated, the light blinks in blue
for approximately 2 seconds. When set to other than "Right after", if the set time
elapses, the light blinks in blue for approximately 2 seconds to indicate that Lock
on close is activated. Note that, when the light blinks in red for approximately 2
seconds, it indicates that Lock on close is not activated.
Restricting calls/mail/data transfer
Accepting/Rejecting calls from specified phone
numbers
Accepting/Rejecting incoming call can be set for each phone number saved in
FOMA terminal phonebook.
･
To use this function, specifying Accept/Reject call for each phone number and
Specified caller setting are required. The settings and the operations of Accept/
Reject call are as listed below.
*
The call or PushTalk call from a specified phone number is disconnected without activating ring
alert and the caller hears a busy tone.
･
This function is activated only when the other party sends caller ID.
･
Rejected calls are recorded as missed calls.
･
If Ring time is set to "0 Sec." for Voice Mail or Call forwarding, Voice Mail or Call
forwarding is activated and the call is not stored as a received call.
･
Combination of Caller ID request service and Anonymous caller is
recommended when used.
◆ Specifying phone numbers to accept/reject calls
<Accept/Reject call>
Accepting/Rejecting incoming call is set for phone numbers saved in FOMA
terminal phonebook.
1 d e
Search the phonebook
e
Place the cursor on a phonebook
entry to set and
m353 e
Authenticate
e
Select a
phone number
e 1
-
3
･
To accept/reject calls from specified phone numbers, activate settings of
Specified caller in succession to the above step.
✔
INFORMATION
･
When changing or deleting the phone number with Accept/Reject call is set, this
setting is canceled. Set Accept/Reject call again for the new number.
◆ Enabling Accept/Reject call from specified numbers
<Specified caller>
･
This setting applies to all phone numbers with Accept/Reject call set.
･
Reject call and Accept call are not enabled simultaneously.
1 m
[Settings & NW services]
551 e
Authenticate
e 1
-
3
✔
INFORMATION
･
If a call without caller ID is received from a party you set Reject call, the FOMA
terminals response is according to the setting in Anonymous caller regardless of this
setting.
･
When Accept call is selected with no phonebook data set for Accept call, a message
appears indicating to reject all incoming calls. Select "Yes" to reject all incoming calls.
･
Regardless of this setting, i-mode mail and SMS are received.
Setting
Accept/Reject call for each phone number
Accept call Reject call No setting
Specified caller Cancel settings Accepted Accepted Accepted
Reject call Accepted Rejected
*
Accepted
Accept call Accepted Rejected
*
Rejected
*