manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 988

Dell Networking OS uses both the VRF name and VRF ID to manage VRF instances. The VRF name and 
VRF ID number are assigned using the ip vrf command. The VRF ID is displayed in show ip vrf command 
output.

The VRF ID is not exchanged between routers. VRF IDs are local to a router.

VRF supports some routing protocols only on the default VRF (default-vrf) instance. 

Table 1

 displays the 

software features supported in VRF and whether they are supported on all VRF instances or only the 
default VRF.

Table 93. Software Features Supported on VRF

Feature/Capability

Support Status for Default VRF

Support Status for Non-default 

VRF

Configuration rollback for 
commands introduced or 
modified

Yes

No

LLDP protocol on the port

Yes

No

802.1x protocol on the VLAN 
port

Yes

No

OSPF, RIP, ISIS, BGP on physical 
and logical interfaces

Yes

Yes

NOTE: OSPF supported on 
all VRF ports. OSPF V2 and 
BGP V4 are supported on 
non-default-VRF ports also. 
Others supported only on 
default-VRF ports.

Dynamic Port-channel (LACP) on 
VLAN port or a Layer 3 port

Yes

Yes

Static Port-channel as VLAN port 
or a Layer 3 port

Yes

Yes

Port-monitoring

Yes

No

BFD on physical and logical 
interfaces

Yes

No

PVST, MSTP, RSTP and 802.1D 
STP for VLANs

Yes

No

FRRP (if applicable) for VLANs

Yes

No

Multicast protocols (PIM-SM, 
MSDP)

Yes

Yes

PIM-DM

No

No

Layer 3 (IPv4/IPv6) ACLs, 
TraceLists, PBR, QoS on VLANs

Yes

Yes

988

Virtual Routing and Forwarding (VRF)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды