manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 896

Dell Networking OS Behavior

: Dell Networking OS uses an encryption algorithm to store the 

authentication key that is different from previous Dell Networking OS versions; Dell Networking OS uses 
data encryption standard (DES) encryption to store the key in the startup-config when you enter the 

ntp 

authentication-key

 command. Therefore, if your system boots with a startup-configuration from an 

Dell Networking OS version in which you have configured 

ntp authentication-key

, the system 

cannot correctly decrypt the key and cannot authenticate the NTP packets. In this case, re-enter this 
command and save the running-config to the startup-config.

To configure NTP authentication, use the following commands.

1.

Enable NTP authentication.
CONFIGURATION mode

ntp authenticate

2.

Set an authentication key.
CONFIGURATION mode

ntp authentication-key 

number

 md5 

key

Configure the following parameters:
•

number

: the range is from 1 to 4294967295. This 

number

 must be the same as the 

number

 in the 

ntp trusted-key

 command.

•

key

: enter a text string. This text string is encrypted.

3.

Define a trusted key.
CONFIGURATION mode

ntp trusted-key 

number

Configure a number from 1 to 4294967295.

The 

number

 must be the same as the 

number

 used in the 

ntp authentication-key

 command.

4.

Configure an NTP server.
CONFIGURATION mode

ntp server [vrf] <vrf-name> {hostname | ipv4-address |ipv6-address} [ key 

keyid

] [prefer] [version 

number

]

Configure the IP address of a server and the following optional parameters:
• –

vrf-name

 : Enter the name of the VRF through which the NTP server is reachable.

–

hostname

 : Enter the keyword hostname to see the IP address or host name of the remote 

device.

–

ipv4-address

 : Enter an IPv4 address in dotted decimal format (A.B.C.D).

–

ipv6-address

 : Enter an IPv6 address in the format 

0000:0000:0000:0000:0000:0000:0000:0000. Elision of zeros is supported.

–

key 

keyid

 : Configure a text string as the key exchanged between the NTP server and the 

client.

–

prefer

: Enter the keyword prefer to set this NTP server as the preferred server.

–

version 

number

 : Enter a number as the NTP version. The range is from 1 to 4.

5.

Configure the switch as NTP master.
CONFIGURATION mode

896

System Time and Date

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды