manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 136

  Number of messages from IFA about port state change: 0

  Number of messages communicated b/w Manager and Agent: 7

Disabling and Re-Enabling BFD

BFD is enabled on all interfaces by default, though sessions are not created unless explicitly configured.
If you disable BFD, all of the sessions on that interface are placed in an Administratively Down state ( the 
first message example), and the remote systems are notified of the session state change (the second 
message example).
To disable and re-enable BFD on an interface, use the following commands.

• Disable BFD on an interface.

INTERFACE mode

no bfd enable

• Enable BFD on an interface.

INTERFACE mode

bfd enable

If you disable BFD on a local interface, this message displays:

     R1(conf-if-te-4/24/1)#01:00:52: %RPM0-P:RP2 %BFDMGR-1-BFD_STATE_CHANGE: 

Changed session state to 

Ad

Dn

 for neighbor 2.2.2.2 on interface Te 4/24/1 (diag: 0)

If the remote system state changes due to the local state administration being down, this message 
displays:

     R2>01:32:53: %RPM0-P:RP2 %BFDMGR-1-BFD_STATE_CHANGE: Changed session state 

to 

Down

 for neighbor

2.2.2.1 on interface Te 2/1/1 (diag: 7)

Configure BFD for Static Routes

BFD offers systems a link state detection mechanism for static routes. With BFD, systems are notified to 
remove static routes from the routing table as soon as the link state change occurs, rather than waiting 
until packets fail to reach their next hop.
Configuring BFD for static routes is a three-step process:

1.

Enable BFD globally.

2.

Configure static routes on both routers on the system (either local or remote). 

3.

Configure an IP route to connect BFD on the static routes using the 

ip route bfd

 command.

Related Configuration Tasks

•

Changing Static Route Session Parameters

•

Disabling BFD for Static Routes

136

Bidirectional Forwarding Detection (BFD)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды