Dell S6000-ON, Руководство по настройке

Страница: 430 / 1080

ARP Learning via ARP Request
In Dell Networking OS versions prior to 8.3.1.0, Dell Networking OS learns via ARP requests only if the
target IP specified in the packet matches the IP address of the receiving router interface. This is the case
when a host is attempting to resolve the gateway address.
If the target IP does not match the incoming interface, the packet is dropped. If there is an existing entry
for the requesting host, it is updated.
Figure 45. ARP Learning via ARP Request
Beginning with Dell Networking OS version 8.3.1.0, when you enable ARP learning via gratuitous ARP, the
system installs a new ARP entry, or updates an existing entry for all received ARP requests.
Figure 46. ARP Learning via ARP Request with ARP Learning via Gratuitous ARP Enabled
Whether you enable or disable ARP learning via gratuitous ARP, the system does not look up the target IP.
It only updates the ARP entry for the Layer 3 interface with the source IP of the request.
Configuring ARP Retries
You can configure the number of ARP retries.
The default backoff interval remains at 20 seconds.
To set and display ARP retries, use the following commands.
430
IPv4 Routing