manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 356

response, the querier removes the group from the list associated with forwarding port and stops 

forwarding traffic for that group to the subnet.

IGMP Version 3

Conceptually, IGMP version 3 behaves the same as version 2. However, there are differences.

• Version 3 adds the ability to filter by multicast source, which helps multicast routing protocols avoid 

forwarding traffic to subnets where there are no interested receivers.

• To enable filtering, routers must keep track of more state information, that is, the list of sources that 

must be filtered. An additional query type, the Group-and-Source-Specific Query, keeps track of state 

changes, while the Group-Specific and General queries still refresh the existing state.

• Reporting is more efficient and robust: hosts do not suppress query responses (non-suppression 

helps track state and enables the immediate-leave and IGMP snooping features), state-change reports 

are retransmitted to insure delivery, and a single membership report bundles multiple statements from 

a single host, rather than sending an individual packet for each statement.

The version 3 packet structure is different from version 2 to accommodate these protocol 
enhancements. Queries are still sent to the all-systems address 224.0.0.1, as shown in the following 
illustration, but reports are sent to the all IGMP version 3-capable multicast routers address 244.0.0.22, as 
shown in the second illustration.

Figure 41. IGMP Version 3 Packet Structure

356

Internet Group Management Protocol (IGMP)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды