manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 54

To change the default directory, use the following command.

• Change the default directory.

EXEC Privilege mode

cd 

directory

View Command History

The command-history trace feature captures all commands entered by all users of the system with a time 
stamp and writes these messages to a dedicated trace log buffer.

The system generates a trace message for each executed command. No password information is saved 
to the file.

To view the command-history trace, use the 

show command-history

 command.

Example of the 

show command-history

 Command

Dell#show command-history

[12/5 10:57:8]: CMD-(CLI):service password-encryption

[12/5 10:57:12]: CMD-(CLI):hostname Force10

[12/5 10:57:12]: CMD-(CLI):ip telnet server enable

[12/5 10:57:12]: CMD-(CLI):line console 0

[12/5 10:57:12]: CMD-(CLI):line vty 0 9

[12/5 10:57:13]: CMD-(CLI):boot system rpm0 primary flash://FTOS-

CB-1.1.1.2E2.bin

Upgrading Dell Networking OS

NOTE: To upgrade Dell Networking Operating System (OS), refer to the Release Notes for the 

version you want to load on the system.

Using HTTP for File Transfers

Stating with Release 9.3(0.1), you can use HTTP to copy files or configuration details to a remote server. 

Use the 

copy source-file-url http://host[:port]/file-path 

command to transfer files to an external server.

Enter the following 

source-file-url 

keywords and information:

• To copy a file from the internal FLASH, enter flash:// followed by the filename.
• To copy the running configuration, enter the keyword running-config.
• To copy the startup configuration, enter the keyword startup-config.
• To copy a file on the external FLASH, enter usbflash:// followed by the filename.

In the Dell Networking OS release 9.8(0.0), HTTP services are enhanced to support the VRF-aware 
functionality. If you want the HTTP server to use a VRF table that is attached to an interface, configure 
that HTTP server to use a specific routing table. You can use the 

ip http vrf

 command to inform the 

HTTP server to use a specific routing table. After you configure this setting, the VRF table is used to look 
up the destination address.

NOTE: To enable HTTP to be VRF-aware, as a prerequisite you must first define the VRF.

You can specify either the management VRF or a nondefault VRF to configure the VRF awareness setting.

54

Getting Started

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды