manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 913

command. In a port-based VLAN, use the tagged command to add the interface to another VLAN. The 

show vlan

 command output displays the interface’s (po 1) changed status.

Except for hybrid ports, only a tagged interface can be a member of multiple VLANs. You can assign 
hybrid ports to two VLANs if the port is untagged in one VLAN and tagged in all others.

Dell#

show vlan

Codes: * - Default VLAN, G - GVRP VLANs

  NUM Status   Q  Ports

* 1   Inactive

  2   Active   T  Po1(So 0/0-1)

               T  Te 1/1/1

  3   Active   T  Po1(So 0/0-1)

               T  Te 1/2/1

Dell#config

Dell(conf)#interface vlan 4

Dell(conf-if-vlan)#

tagged po 1

Dell(conf-if-vlan)#show conf

!

interface Vlan 4

  no ip address

  tagged Port-channel 1

Dell(conf-if-vlan)#end

Dell#

show vlan

Codes: * - Default VLAN, G - GVRP VLANs

  NUM Status   Q  Ports

* 1   Inactive

  2   Active   T  Po1(So 0/0-1)

               T  Te 1/1/1

  3   Active   T  Po1(So 0/0-1)

               T  Te 1/2/1

  4   Active   T  Po1(So 0/0-1)

When you remove a tagged interface from a VLAN (using the 

no tagged interface

 command), it 

remains tagged only if it is a tagged interface in another VLAN. If the tagged interface is removed from 
the only VLAN to which it belongs, the interface is placed in the Default VLAN as an untagged interface.

Moving Untagged Interfaces

To move untagged interfaces from the Default VLAN to another VLAN, use the following commands.

1.

Access INTERFACE VLAN mode of the VLAN to which you want to assign the interface.
CONFIGURATION mode

interface vlan 

vlan-id

2.

Configure an interface as untagged.
INTERFACE mode

untagged 

interface

This command is available only in VLAN interfaces.

Virtual LANs (VLANs)

913

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды