manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 944

vlt-peer-lag port-channel 

id-number

The valid port-channel ID numbers are from 1 to 128.

7.

Repeat Steps 1 to 6 on the VLT peer switch to configure the same port channel as part of the VLT 
domain.

8. On an attached switch or server

: To connect to the VLT domain and add port channels to it, 

configure a port channel. For an example of how to verify the port-channel configuration, refer to 

VLT Sample Configuration

.

To configure the VLAN where a VLT peer forwards received packets over the VLTi from an adjacent VLT 
peer that is down, use the 

peer-down-vlan

 parameter. When a VLT peer with BMP reboots, untagged 

DHCP discover packets are sent to the peer over the VLTi. Using this configuration ensures the DHCP 
discover packets are forwarded to the VLAN that has the DHCP server.

Configuring a VLT VLAN Peer-Down (Optional)

To configure a VLT VLAN peer-down, use the following commands.

1.

Enter VLT-domain configuration mode for a specified VLT domain.
CONFIGURATION mode

vlt domain 

domain-id

The range of domain IDs is from 1 to 1000.

2.

Enter the port-channel number that acts as the interconnect trunk.
VLT DOMAIN CONFIGURATION mode

peer-link port-channel 

id-number

The range is from 1 to 128.

3.

Enter the VLAN ID number of the VLAN where the VLT forwards packets received on the VLTi from 

an adjacent peer that is down.
VLT DOMAIN CONFIGURATION mode

peer-down-vlan 

vlan interface number

The range is from 1 to 4094.

Configuring Enhanced VLT (eVLT) (Optional)

To configure enhanced VLT (eVLT) between two VLT domains on your network, use the following 

procedure.

For a sample configuration, refer to 

eVLT Configuration Example

. To set up the VLT domain, use the 

following commands.

1.

Configure the port channel to be used for the VLT interconnect on a VLT switch and enter interface 
configuration mode.
CONFIGURATION mode

interface port-channel 

id-number

Enter the same port-channel number configured with the 

peer-link port-channel

 command in 

the .

2.

Add one or more port interfaces to the port channel.

944

Virtual Link Trunking (VLT)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды