manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 1041

Trace Logs

In addition to the syslog buffer, Dell Networking OS buffers trace messages which are continuously 
written by various Dell Networking OS software tasks to report hardware and software events and status 
information.

Each trace message provides the date, time, and name of the Dell Networking OS process. All messages 
are stored in a ring buffer. You can save the messages to a file either manually or automatically after 
failover.

Auto Save on Crash or Rollover

Exception information for MASTER or standby units is stored in the 

flash:/TRACE_LOG_DIR

 directory. This 

directory contains files that save trace information when there has been a task crash or timeout.

• On a MASTER unit, you can reach the 

TRACE_LOG_DIR

 files by FTP or by using the 

show file 

command from the 

flash://TRACE_LOG_DIR

 directory.

• On a Standby unit, you can reach the 

TRACE_LOG_DIR

 files only by using the 

show file

 command 

from the 

flash://TRACE_LOG_DIR

 directory.

NOTE: Non-management member units do not support this functionality.

Hardware Watchdog Timer

The 

hardware watchdog

 command automatically reboots an Dell Networking OS switch/router with a 

single RPM that is unresponsive.

This is a last resort mechanism intended to prevent a manual power cycle.

Enabling Environmental Monitoring

The device components use environmental monitoring hardware to detect transmit power readings, 

receive power readings, and temperature updates.

To receive periodic power updates, you must enable the following command.

• Enable environmental monitoring.

enable optic-info-update interval

Example of the 

show interfaces transceiver

 Command

Dell#show interfaces transceiver

-- RPM Environment Status --

Slot Status     Temp  Voltage

------------------------------

0    active     33C   ok

1    not present

Recognize an Overtemperature Condition

An overtemperature condition occurs, for one of two reasons: the card genuinely is too hot or a sensor 
has malfunctioned.

Inspect cards adjacent to the one reporting the condition to discover the cause.

Debugging and Diagnostics

1041

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды