Dell S6000-ON, Руководство по настройке

Страница: 790 / 1080

EXEC Privilege mode
ssh { hostname } [-l username | -p port-number | -v {1 | 2}| -c encryption
cipher | -m HMAC algorithm
hostname
is the IP address or host name of the remote device. Enter an IPv4 or IPv6 address in
dotted decimal format (A.B.C.D).
• SSH V2 is enabled by default on all the modes.
• Display SSH connection information.
EXEC Privilege mode
show ip ssh
Specifying an SSH Version
The following example uses the
ip ssh server version 2
command to enable SSH version 2 and
the
show ip ssh
command to confirm the setting.
Dell(conf)#ip ssh server version 2
Dell(conf)#do show ip ssh
SSH server : enabled.
SSH server version : v2.
SSH server vrf : default.
SSH server ciphers : 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-
ctr,aes192-ctr,aes256-ctr.
SSH server macs : hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmac-
sha2-256,hmac-sha2-256-96.
SSH server kex algorithms : diffie-hellman-group-exchange-sha1,diffie-hellman-
group1-sha1,diffie-hellman-group14-sha1.
Password Authentication : enabled.
Hostbased Authentication : disabled.
RSA Authentication : disabled.
Vty Encryption HMAC Remote IP
Dell(conf)#
To disable SSH server functions, use the
no ip ssh server enable
command.
Using SCP with SSH to Copy a Software Image
To use secure copy (SCP) to copy a software image through an SSH connection from one switch to
another, use the following commands.
1. On Switch 1, set the SSH port number ( port 22 by default).
CONFIGURATION MODE
ip ssh server port number
2. On Switch 1, enable SSH.
CONFIGURATION MODE
copy ssh server enable
3. On Switch 2, invoke SCP.
CONFIGURATION MODE
copy scp: flash:
4. On Switch 2, in response to prompts, enter the path to the desired file and enter the port number
specified in Step 1.
790
Security