![Dell S6000-ON Скачать руководство пользователя страница 851](http://html.mh-extra.com/html/dell/s6000-on/s6000-on_configuration-manual_84557851.webp)
Copying a Configuration File
To copy a configuration file, use the following commands.
NOTE: In UNIX, enter the
snmpset
command for help using the following commands. Place the
f10-copy-config.mib
file in the directory from which you are executing the
snmpset
command or
in the snmpset tool path.
1.
Create an SNMP community string with read/write privileges.
CONFIGURATION mode
snmp-server community
community-name
rw
2.
Copy the
f10-copy-config.mib
MIB from the Dell iSupport web page to the server to which you are
copying the configuration file.
3.
On the server, use the
snmpset
command as shown in the following example.
snmpset -v
snmp-version
-c
community-name
-m
mib_path/
f10-copy-config.mib
force10system-ip-address mib-object.index
{i | a | s}
object-value
...
• Every specified object must have an object value and must precede with the keyword i. Refer to
the previous table.
•
index
must be unique to all previously executed
snmpset
commands. If an index value has been
used previously, a message like the following appears. In this case, increment the index value and
enter the command again.
Error in packet.
Reason: notWritable (that object does not support modification)
Failed object: FTOS-COPY-CONFIG-MIB::copySrcFileType.101
• To complete the command, use as many MIB objects in the command as required by the MIB
object descriptions shown in the previous table.
NOTE: You can use the entire OID rather than the object name. Use the form:
OID.index i
object-value
.
To view more information, use the following options in the
snmpset
command.
•
-c
: View the community, either public or private.
•
-m
: View the MIB files for the SNMP command.
•
-r
: Number of retries using the option
•
-t
: View the timeout.
•
-v
: View the SNMP version (either 1, 2, 2d, or 3).
The following examples show the
snmpset
command to copy a configuration. These examples assume
that:
• the server OS is UNIX
• you are using SNMP version 2c
• the community name is public
• the file
f10-copy-config.mib
is in the current directory or in the snmpset tool path
Copying Configuration Files via SNMP
To copy the running-config to the startup-config from the UNIX machine, use the following command.
Simple Network Management Protocol (SNMP)
851
Содержание S6000-ON
