manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 762

INTERFACE mode

no shutdown

Example of Verifying an Interface is in Layer 2 Mode and Enabled

To verify that an interface is in Layer 2 mode and enabled, use the 

show config

 command from 

INTERFACE mode. The bold lines indicate that the interface is in Layer 2 mode.

Dell(conf-if-te-1/1/1)#show config

!

interface TenGigabitEthernet 1/1/1

  no ip address

  

switchport

no shutdown

Dell(conf-if-te-1/1/1)#

Enabling Rapid Spanning Tree Protocol Globally

Enable RSTP globally on all participating bridges; it is not enabled by default.
When you enable RSTP, all physical and port-channel interfaces that are enabled and in Layer 2 mode are 
automatically part of the RST topology.

• Only one path from any bridge to any other bridge is enabled.
• Bridges block a redundant path by disabling one of the link ports.

To enable RSTP globally for all Layer 2 interfaces, use the following commands.

1.

Enter PROTOCOL SPANNING TREE RSTP mode.
CONFIGURATION mode

protocol spanning-tree rstp

2.

Enable RSTP.
PROTOCOL SPANNING TREE RSTP mode

no disable

Examples of the RSTP 

show

 Commands

To disable RSTP globally for all Layer 2 interfaces, enter the 

disable

 command from PROTOCOL 

SPANNING TREE RSTP mode.
To verify that RSTP is enabled, use the 

show config

 command from PROTOCOL SPANNING TREE RSTP 

mode. The bold line indicates that RSTP is enabled.

Dell(conf-rstp)#show config

!

protocol spanning-tree rstp

no disable

Dell(conf-rstp)#

762

Rapid Spanning Tree Protocol (RSTP)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды