manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 943

4.

(Optional) When you create a VLT domain on a switch, Dell Networking OS automatically assigns a 
unique unit ID (0 or 1) to each peer switch.
VLT DOMAIN CONFIGURATION mode

unit-id {0 | 1}

To explicitly configure the default values on each peer switch, use the 

unit-id

 command.

Configure a different unit ID (0 or 1) on each peer switch.

Unit IDs are used for internal system operations.

Use this command to minimize the time required for the VLT system to determine the unit ID 
assigned to each peer switch when one peer switch reboots.

Connecting a VLT Domain to an Attached Access Device (Switch or Server)

To connect a VLT domain to an attached access device, use the following commands.

On a VLT peer switch

: To connect to an attached device, configure the same port channel ID number on 

each peer switch in the VLT domain.

1.

Configure the same port channel to be used to connect to an attached device and enter interface 

configuration mode.
CONFIGURATION mode

interface port-channel 

id-number

2.

Remove an IP address from the interface.
INTERFACE PORT-CHANNEL mode

no ip address

3.

Place the interface in Layer 2 mode.
INTERFACE PORT-CHANNEL mode

switchport

4.

Add one or more port interfaces to the port channel.
INTERFACE PORT-CHANNEL mode

channel-member 

interface

interface

: specify one of the following interface types:

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port/

subport information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port 

information.

5.

Ensure that the port channel is active.
INTERFACE PORT-CHANNEL mode

no shutdown

6.

Associate the port channel to the corresponding port channel in the VLT peer for the VLT connection 
to an attached device.
INTERFACE PORT-CHANNEL mode

Virtual Link Trunking (VLT)

943

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды