manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 580

•

Enabling SNMP Traps for Root Elections and Topology Changes

•

Configuring Spanning Trees as Hitless

Enable Multiple Spanning Tree Globally

MSTP is not enabled by default. To enable MSTP globally, use the following commands.
When you enable MSTP, all physical, VLAN, and port-channel interfaces that are enabled and in Layer 2 
mode are automatically part of the MSTI 0.

• Within an MSTI, only one path from any bridge to any other bridge is enabled.
• Bridges block a redundant path by disabling one of the link ports.

1.

Enter PROTOCOL MSTP mode.
CONFIGURATION mode

protocol spanning-tree mstp

2.

Enable MSTP.
PROTOCOL MSTP mode

no disable

Example of Verifying MSTP is Enabled

To verify that MSTP is enabled, use the 

show config

 command in PROTOCOL MSTP mode.

Dell(conf)#protocol spanning-tree mstp

Dell(config-mstp)#show config

!

protocol spanning-tree mstp

  

no disable

Dell#

Adding and Removing Interfaces

To add and remove interfaces, use the following commands.

To add an interface to the MSTP topology, configure it for Layer 2 and add it to a VLAN.
If you previously disabled MSTP on the interface using the 

no spanning-tree 0

 command, to enable 

MSTP, use the following command.

•

spanning-tree 0

To remove an interface from the MSTP topology, use the 

no spanning-tree 0

 command.

Creating Multiple Spanning Tree Instances

To create multiple spanning tree instances, use the following command.
A single MSTI provides no more benefit than RSTP. To take full advantage of MSTP, create multiple MSTIs 
and map VLANs to them.

• Create an MSTI.

PROTOCOL MSTP mode

msti

Specify the keyword 

vlan

 then the VLANs that you want to participate in the MSTI.

580

Multiple Spanning Tree Protocol (MSTP)

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды