manualshive.com logo in svg

Dell S6000-ON, Руководство по настройке

Поделиться
Скачать
Dell S6000-ON Скачать руководство пользователя страница 684

Figure 99. Remote Port Mirroring

Configuring Remote Port Mirroring

Remote port mirroring requires a source session (monitored ports on different source switches), a 

reserved tagged VLAN for transporting mirrored traffic (configured on source, intermediate, and 

destination switches), and a destination session (destination ports connected to analyzers on destination 

switches).

Configuration Notes

When you configure remote port mirroring, the following conditions apply:

• You can configure any switch in the network with source ports and destination ports, and allow it to 

function in an intermediate transport session for a reserved VLAN at the same time for multiple 

remote-port mirroring sessions. You can enable and disable individual mirroring sessions.

• BPDU monitoring is not required to use remote port mirroring.
• A remote port mirroring session mirrors monitored traffic by prefixing the reserved VLAN tag to 

monitored packets so that they are copied to the reserve VLAN.

• Mirrored traffic is transported across the network using 802.1Q-in-802.1Q tunneling. The source 

address, destination address and original VLAN ID of the mirrored packet are preserved with the 

tagged VLAN header. Untagged source packets are tagged with the reserve VLAN ID.

• You cannot configure a private VLAN or a GVRP VLAN as the reserved RPM VLAN.
• The RPM VLAN can’t be a Private VLAN.
• The RPM VLAN can be used as GVRP VLAN.

684

Port Monitoring

Содержание S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды